Hand Tools &Hand Pliers — Manual Grommet and Snap Installation Guide

Introduction

MICRON® America hand tools are ideal for beginners, small workshops, and on-site repairs. In addition, they let you install grommets, snaps, and oblong fasteners by hand when machines are unavailable. Even better, hand tools can reach inside thick fabrics where many machines cannot. As a result, you can get clean cuts and consistent sets without pneumatic or hydraulic power.

Replace that bullet section with this:

• First, they are beginner-friendly and easy to learn.

• Also, they are portable and cost-effective. No electricity or air compressor is needed.

• In addition, they work well from the inner side of thick fabrics when the machine throat depth is limited.

• Furthermore, they are built from durable steel and include long-life Teflon or plastic cutting boards.

• Most importantly, many kits include cutting components, so you can punch and set with one setup.

• Finally, you only need a rubber or nylon mallet to complete the process.

Replace your “How It Works” steps with this:

1. First, cut the hole using the cutter or belt punch.

2. Next, insert the grommet (male part) through the hole.

3. Then, place the washer or snap part on the reverse side.

4. Finally, strike with a rubber or nylon mallet until the set is tight.

Reminder: Always use a rubber or nylon mallet. Never use a steel hammer.

Official MICRON® Hand Tool Kit Diagram

1. a) Inserting Die  b) Die Block  c) Cutter  d) Teflon Block  e) Grommet  f) Washer

Step-by-Step Directions

1️⃣ Fold the material and mark the hole location. Place the Teflon block underneath and the cutter over; strike gently with a mallet to cut.
2️⃣ Insert the grommet from below, aligning it with the die block. Place the washer on top (rounded side up).
3️⃣ Set the top die in the hole. Tap lightly with a mallet, then increase force until the grommet is set.

REMEMBER: Always use a rubber or nylon mallet — never a steel hammer.

MICRON® Hand Tool Categories

Curtain, Tarp & Awning Grommet Hand Tools
• 1-1/2″ (#12) Square Style Curtain Grommet Hand Tool – Includes Cutter & Teflon Base
• 1-1/2″ (#12) Hand Tool Kit for Tarp, Awning & Curtain Grommets – Includes Cutter & Cutting Board
• 2″ (#15) Tarp/Awning Grommet Hand Tool Set – Includes Cutter & Cutting Board
• 2-1/2″ (#18) Curtain Grommet Hand Tool – Includes Cutter & Teflon Board

Oblong (Oval) Grommet Hand Tools
• 55/64″ × 1-37/64″ (M-700) Oblong Hand Tool – Includes Cutter & Teflon Board
• 5/16″ × 3/4″ (A-591) Oblong Hand Tool – Includes Cutter & Teflon Board
• 15/16″ × 2-1/64″ (A-671) Oblong Hand Tool – Includes Cutter & Teflon Board

Sheet Metal & Rolled Rim Grommet Hand Tool Kits
• 3/16″ to 1/2″ Hand Tool Kit – For Sheet Metal Grommets & Teeth Washers
• 3/16″ to 1-7/64″ Hand Tool Kit – For Sheet Metal Grommets & Plain Washers
• 9/32″ to 1-3/32″ Rolled Rim Grommet & Spur Washer Hand Tool Kit – Includes Hole Cutter + Teflon Board

Snap Hand (Flaring) Tool Sets
• HT-M230 – 12.5 mm (½″ / 20 Ligne) & 15 mm (⅝″ / 24 Ligne) Ring Snap Hand Tool Set
• HT-M231 – 12.5 mm (½″ / 20 Ligne) & 15 mm (⅝″ / 24 Ligne) Ring Snap Tool Set – 6 Sets (4-Part Snaps)

Belt Punch Tools
• 5/32″ (4 mm) to 1-7/64″ (28 mm) Belt Punch – Hardened Cutting Edge & Milled Clearing Hole

MICRON® No. 250 Webbing & Canvas Pliers

Overview
The MICRON® No. 250 Webbing and Canvas Pliers are a professional-grade hand tool engineered for reliable fabric stretching, gripping, and positioning. Essential for sign makers, awning technicians, tarpaulin producers, and banner installers, these pliers ensure firm fabric tension and accurate alignment without slippage.

Key Features
• Material: Spheroidal cast iron for maximum strength and long-term durability
• Handles: Plastic-coated, ergonomic design for a comfortable, non-slip grip
• Function: Stretches and positions webbing, canvas, or vinyl banners without material shifting
• Applications: Ideal for sign shops, awning manufacturers, tarpaulin installers, and banner companies
• Portability: Compact and lightweight construction for easy transport and storage

Watch the MICRON® No. 250 in Action:

Fabric Cutting Die with Teflon Board – Curtain Grommet Tool

Overview
The MICRON® Fabric Cutting Die with Teflon Board is a durable and efficient tool designed for creating clean, round holes in curtains, fabrics, leather, and banners. Each set includes a forged steel cutting die and a high-strength Teflon board, engineered for long-term professional use.

Key Features
• Material: Forged steel die with high-quality Teflon cutting board
• Operation: Simple mallet use — no machine required
• Durability: Designed for long-lasting, repeated professional use
• Precision: Produces smooth, round holes without fraying

Watch the Cutting Die in Action:

Hand Tools & Cutters for Curtain Grommets with The Mallet

Overview
The MICRON® Hand Tool Kit for Curtain Grommets is engineered for heavy-duty tarp, awning, and curtain applications where strength, precision, and durability are essential. Manufactured from premium 1040 carbon steel instead of cast materials, this professional-grade set delivers exceptional hardness and long-term reliability for both industrial and commercial production.

Complete 4-Piece Kit
• Top Setting Die – Holds and secures the grommet from above
• Lower Setting Die – Supports the washer and provides a firm base
• Cutting Die – Punches a clean, precise hole in the material
• Plastic Teflon Board – Stabilizes the surface and protects the workbench

Watch the Hand Tool Kit in Action:
https://www.youtube.com/watch?v=gqmeAZzNMvk

Accessories You’ll Need

Mallet: All hand tools require a non-marring mallet (rubber or nylon). It drives the cutter and die set without damaging surfaces.
Cutting Boards: Each MICRON® set includes a Teflon or plastic base for clean cuts and longer tool life.

Best Practices for Beginners

• Always practice on scrap fabric before production.
  • Match hole size and grommet diameter correctly.
  • Use firm, even strikes with the mallet — not excessive force.
  • Keep dies clean and dry to prevent rust.
  • For inner fabric sides or inaccessible areas, hand tools are the best choice.

Why Choose MICRON® America Hand Tools

• CE & ISO 9001 certified European manufacturing
  • Complete range: grommets, snaps, rivets, and dies
  • Durable steel dies and long-life cutting boards
  • Fast U.S. warehouse shipping & full support
  • Serving professionals since 1995