[mc4wp_form id="74"]
#00 (3/16”) Sheet Metal Grommet Dies With Hole Piercing Die
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ The top shaft of our dies is 1/4" threaded.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#0 (1/4”) Sheet Metal Grommet Dies With Hole Piercing Die
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ The top shaft of our dies is 1/4" threaded.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#1 (9/32”) Sheet Metal Grommet Dies With Hole Piercing Die
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ The top shaft of our dies is 1/4" threaded.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#2 (3/8 inch ) Sheet Metal Grommet Dies With Hole Piercing Die
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ The top shaft of our dies is 1/4" threaded.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#3 (7/16 inch ) Sheet Metal Grommet Dies With Hole Piercing Die
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ The top shaft of our dies is 1/4" threaded.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#4 (1/2 inch ) Sheet-Metal Grommet Dies With Hole Piercing Die
Set sheet-metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The dies first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ The top shaft of our dies is 1/4" threaded.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet-metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#5 (5/8 inch ) Sheet-Metal Grommet Dies With Hole Piercing Die
Set sheet-metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The dies first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ The top shaft of our dies is 1/4" threaded.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet-metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#6 (13/16 inch ) Sheet-Metal Grommet Dies With Hole Piercing Dies
Set sheet-metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√The top shaft of our dies is 1/4" threaded.
√ Compatible with the TEP-3, M-3, PL-10 and MC-20 fastener attaching machine, intended only for sheet-metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#7 (1 inch ) Sheet Metal Grommet Dies With Hole Piercing Dies
Set sheet-metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√The top shaft of our dies is 1/4" threaded.
√ Compatible with the TEP-3, M-3, PL-10 and MC-20 fastener attaching machine, intended only for sheet-metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#8 (1-1/4 inch ) Sheet Metal Grommet Dies With Hole Piercing Die
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ The top shaft of our dies is 1/4" threaded.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#12 (1-1/2″ ) Sheet Metal Grommet Dies With Hole Piercing Die
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ 3/8 inch smooth top stem, 3/4 inch smooth bottom stem.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#15 (2″) Sheet Metal Grommet Dies With Hole Piercing Die
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
Dies are final sale, and cannot be returned NO EXCEPTIONS.