Showing 1–12 of 19 results

No. 149 – Arch Punch – size from 49mm to 55mm

$30.00
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 2-1/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

No. 149 – Arch Punch – size from 37mm to 48mm

$30.00
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 2-1/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

No. 149 – Arch Punch – size from 25mm to 36mm

$30.00
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 2-1/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

No. 149 – Arch Punch – size from 13mm to 24mm

$30.00
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 2-1/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

No. 223 – Revolving Punch

$93.70
The frame is made of highly polished steel and the cutting dies are simply pushed in for easy replacement. Replacement cutting tubes are also available. This set can make the following hole sizes; 0 (5/64”), 1 (3/32”), 2 (7/64”), 3 (1/8”), 4 (5/32”) & 6 (3/16”)

Belt Punch Hardened Cutting Edge – Milled Clearing Hole

$10.00$58.00
Micron hand tools are made of high quality stainless steel material. Remember to use a plastic mallet, not a steel hammer. This set can make the following hole sizes; 1(3/32"), 2(7/64"), 3(1/8"), 4(5/32"), 5(11/64"), & 6(3/16")

No. K-245 – Belt Punch Set

$49.58
Kit contains the most frequently used sizes packed in a sturdy vinyl pouch. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

No. K-245 L – Belt Punch Set Large

$53.50
Kit contains the bigest sizes of belt punches: 1/2", 9/16", 5/8", 3/4", 7/8" & 1" They are packed in a sturdy easy to use canvas tool rol. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

No. K-157 – Mini Punch Set

$38.04
Special punch set for cutting small, precise holes in soft materials where throated or plier punches won’t reach. Set has a round handle with slot inside to clear punchings. Handle is threaded to accommodate the seven replaceable screw tubes which are shown at left. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

No. 622 – Ventilator Punch

Hardened and tempered steel. High quality. Used to punch ventilator holes illustrated in pattern. Overall Lenght : 5-1/4'' Hole Diameter: 3/32''

No. 400 – Oblong Punch

$52.36
Polished barrel with hardened cutting edge. Hole tapers inside for easy punching clearings. Available in 2 sizes. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

No. 149 – Arch Punch – size from 2mm to 12mm

$30.00
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 2-1/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.