PRODUCT | SMALLEST SIZE(ID) | LARGEST SIZE(ID) | STYLES |
Self Piercing | #1 (5/16'') | #3 (7/16'') | SPGW |
Snaps | 15 mm (5/8'') | 15 mm (5/8'') | Ring Snaps |
H-1 Portable Hand Pliers, #1 Self-Piercing Dies with #1 Grommets and Washers (100 sets)
$132.03 – $135.03
H-1 hand pliers are an ideal machine for easy and portable machine that resembles the pliers in a tool box. The machine is made out of heavy duty castiron, so it will last for years.
H-1 hand pliers is capable of setting #1 (5/16”), #2 (3/8”), #3 (7/16”) self-piercing grommets and washers. Which is a special grommets made to cut and set at the same time. Recommended for banners, canvas and lightweight signs.
Professional grommet setting tools much higher quality than those found at most fabric stores.
Package deal comes as a complete kit with everything you need to apply.
Package Deal Includes
√ H-1 Portable Hand Pliers
√ #1(5/16”) Self Piercing Grommets Dies
√ #1(5/16”) Self Piercing Grommets & Washers(100 pcs of each)
Weight | 2.2560 lbs |
---|
RELATED PRODUCT
H-1 PORTABLE HAND PLIERS GROMMET AND SNAP SETTER KIT CAPABILITIES
RELATED PRODUCT
SPGW #1 (5/16”) Self-Piercing Grommets & Washers (500 Pcs of each)
Our quality Micron Self-Piercing Grommets are made from heavier gauge brass then traditional sheet metal grommets, allows a one shot installation action without having to pre punch holes to many qualified material such as outdoor signage and vinyl banners. These grommets are the number 1 choice of the banner industry to decrease the production time by half due to its one shot application process. Available in sizes #1.7 (1/8” ID) to #5 (5/8” ID).
All other available sizes and finishes are listed in our “Size Guide” section down below.SPGW #2 3/8″ Self-Piercing Grommets & Washers (500 Pcs of each)
Our quality Micron Self-Piercing Grommets are made from heavier gauge brass then traditional sheet metal grommets, allows a one shot installation action without having to pre punch holes to many qualified material such as outdoor signage and vinyl banners. These grommets are the number 1 choice of the banner industry to decrease the production time by half due to its one shot application process. Available in sizes #1.7 (1/8” ID) to #5 (5/8” ID).
All other available sizes and finishes are listed in our “Size Guide” section down below.SPGW #3 (7/16”) Self-Piercing Grommets & Washers (500 Pcs of each)
Our quality Micron Self-Piercing Grommets are made from heavier gauge brass then traditional sheet metal grommets, allows a one shot installation action without having to pre punch holes to many qualified material such as outdoor signage and vinyl banners. These grommets are the number 1 choice of the banner industry to decrease the production time by half due to its one shot application process. Available in sizes #1.7 (1/8” ID) to #5 (5/8” ID).
All other available sizes and finishes are listed in our “Size Guide” section down below.H-1 #1 Self-Piercing Grommet Dies
H-1 #2 Self-Piercing Grommet Dies
H-1 #3 Self-Piercing Grommet Dies
H-1 15mm Ring Snap Dies
Ring Snaps 15mm (5/8 inch – 24 Ligne) Cap
H-1 Portable Hand Pliers 15mm Ring Snaps with 15 mm Ring Snap Dies (100 pcs of each)
TECHNICAL DATA

H-1 Portable Hand Pliers Grommet and Snap Setter Kit
Height | 44.50 mm | 1-3/4'' |
Frame Depth | 82.55 mm | 3-1/4'' |
Net Weight | 0.74 kg | 1.63 Ib |
Dimensions | 310 x 290 mm | 12.2'' x 11.4'' |
Top and Bottom Shaft Diameters of H-1 Hand Plier
Top | 3/8” |
Bottom | 3/8” |
PLEASE DO NOT OVER TIGHTEN THE SIZE ADJUSTMENT SCREW!
At the end of the handle. because these high qualıty professional hand pliers are made of cast aluminum, they will break if too much pressure is applied while setting grommets. If you feel too much resistance while squeezing the handle, loosen the adjustment screw a little at a time until you are able to squeeze the pliers without too much resistance. securely setting the grommet does not require extra amount of pressure.

Reviews
There are no reviews yet.